How to Change a Harley Electraglide Motor Mount

The motor mount on the Harley Electraglide is between the engine and the frame at the bottom of the engine connected to a cross-member. To change the motor mount you are going to have to get the Harley up off of the ground using a motorcycle jack. The only other tool that you are going to need will be a ratchet set to remove the bolt that is holding the mount to the frame.

Difficulty:

Moderate

Instructions

Things You'll Need

• Motorcycle jack
• Ratchet set

• 1

  Lift the Harley up using the motorcycle jack. Don't place the motorcycle jack on the mount when you lift the Harley.

• 2

  Locate the motor mount on the underside of the Harley between the engine and the cross-member. Place the car jack under the engine and raise the engine up to take the weight off the mount.

• 3

  Remove the bolt that is securing the mount to the engine and frame using a ratchet set. Pull the mount out from between the engine and the frame.

• 4

  Slide the new motor mount between the engine and the frame. Insert the securing bolt and tighten the bolt using a ratchet set